Start a conversation

NetComm Wireless NF5 Setup Guide

8  PHYSICAL CONNECTION

Take an Ethernet cable to connect your modem with the blue WAN port of the router.

Then take another Ethernet cable to connect your computer with one of the Yellow LAN port of the router.

 

                                      Tenda     

 

LOGIN TO THE MANAGEMENT PAGE OF THE ROUTER

Open your web browser, find the address bar and type in http://192.168.20.1

    netcommimage1

After successful login, please choose your access method DHCP or PPPoE

    netcommimage4

    netcommimage3

Under Wireless, change WiFi Network Name to your preffered name and save changes.

Select Wireless security Key to set an 8 characters  password settings for your Wi-Fi and click on Save.

    netcommimage2

click on " Switch to advanced view "

Click on the Network settings and go to change the password, to change it from admin to your choice.

    netcommimage7

    netcommimage8

Finally click on the Security Settings, go to Remote Administration  and enable it.

    netcommimage5

    netcommimage6

    NOTE: This needs to be enabled only in case of trouble shooting and when asked by your Technical Support Officer.

 

Please click below, For Video Guide :

how to connect to the internet using a dial-up connection ( windows 8 ) version.pdf

  1. 733 KB
  2. View
  3. Download
Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. Devi K (Migrated deleted Agent)

  2. Posted
  3. Updated

Comments